Hanna-instruments HI 83216 Instrukcja Użytkownika Pobierz pdf (Strona 17)

32 33

The analyzed data can be managed using Hanna’s product HI92000, Windows

Compatible Software.

DATA MANAGEMENT

The instrument shows clear warning messages when erroneous conditions appear and when measured values are

outside the expected range. These messages are described bellow.

No Light: The light source is not functioning properly.

Light Leak: There is an excess amount of ambient light reaching the

detector.

Inverted cuvettes: The sample and the zero cuvettes are inverted.

Battery Low: The battery capacity is lower than 10%.

Light Low: The instrument cannot adjust the light level. Please check

that the sample does not contain any debris.

ERRORS AND WARNINGS

Light High: There is too much light to perform a measurement. Please

check the preparation of the zero cuvette.

• Remove the cuvette and add 5 drops of HI 93710-0

Phenol Red Indicator. Replace the cap and mix the

solution.

• Reinsert the cuvette into the instrument.

• Press the Read key to start the reading. The instrument displays the pH value.

Windows

is registered Trademark of "Microsoft Co."

1 2 ... 12 13 14 15 16 17 18 19

Brak uwag

Hanna-instruments HI 83216 Instrukcja Użytkownika Strona 17