Hanna-instruments HI 83211 Instrukcja Użytkownika Pobierz pdf (Strona 31)

Cyanuric Acid

SPECIFICATIONS

Range 0 to 80 mg/L

Resolution 1 mg/L

Accuracy ±1 mg/L ±15% of reading at 25 °C

Typical EMC ±1 mg/L

Deviation

Light Source Tungsten lamp with narrow band interference filter @ 525 nm

Method Adaptation of the turbidimetric method. The reaction between cyanuric acid and the

reagent causes a white suspension in the sample.

REQUIRED REAGENTS

Code Description Quantity

HI 93722-0 Powder reagent 1 packet

REAGENT SETS

HI 93722-01 Reagents for 100 tests

HI 93722-03 Reagents for 300 tests

For other accessories see page 66.

MEASUREMENT PROCEDURE

• Select the

Cyanuric Acid

method using the procedure

described in the

Method Selection

section (see page 12).

• Fill the cuvette with 10 mL of unreacted sample (up to the

mark) and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press the Zero key. The meter will show “-0.0-” when the meter is zeroed and ready for

measurement.

10 mL

CYANURIC ACID

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Brak uwag

Hanna-instruments HI 83211 Instrukcja Użytkownika Strona 31